Installation manual

4-153
SIGNAMAX LLC • www.signamax.eu
Default Setting
1800
Command Mode
Global Configuration
Command Usage
• The reauthentication time is a global setting and applies to all ports.
• When the reauthentication time expires for a secure MAC address it is
reauthenticated with the RADIUS server. During the reauthentication process traffic
through the port remains unaffected.
Example
mac-authentication intrusion-action
Use this command to configure the port response to a host MAC authentication failure.
Use the no form of this command to restore the default.
Syntax
mac-authentication intrusion-action [block traffic | pass traffic]
no mac-authentication intrusion-action
Default Setting
Block Traffic
Command Mode
Interface Config
Example
mac-authentication max-mac-count
Use this command to set the maximum number of MAC addresses that can be
authenticated on a port via 802.1X authentication or MAC authentication. Use the no form
of this command to restore the default.
Syntax
mac-authentication max-mac-count count
no mac-authentication max-mac-count
count - The maximum number of 802.1X and MAC-authenticated MAC
addresses allowed. (Range: 1-1024)
Console(config)#mac-authentication reauth-time 300
Console(config)#
Console(config-if)#mac-authentication intrusion-action block-traffic
Console(config-if)#