Installation manual

4-151
SIGNAMAX LLC • www.signamax.eu
Command Usage
The maximum number of MAC addresses per port is 2048, and the maximum
number of secure MAC addresses supported for the switch system is 1024. When
the limit is reached, all new MAC addresses are treated as authentication failed.
Example
network-access dynamic-vlan
Use this command to enable dynamic VLAN assignment for an authenticated port. Use
the no form to disable dynamic VLAN assignment.
Syntax
[no] network-access dynamic-vlan
Default Setting
Enabled
Command Mode
Interface Configuration
Command Usage
• When enabled, the VLAN identifiers returned by the RADIUS server will be applied
to the port, providing the VLANs have already been created on the switch. GVRP
is not used to create the VLANs.
• The VLAN settings specified by the first authenticated MAC address are
implemented for a port. Other authenticated MAC addresses on the port must have
same VLAN configuration, or they are treated as an authentication failure.
• If dynamic VLAN assignment is enabled on a port and the RADIUS server returns
no VLAN configuration, the authentication is still treated as a success, and the host
assigned to the default untagged VLAN.
• When the dynamic VLAN assignment status is changed on a port, all authenticated
addresses are cleared from the secure MAC address table.
Console(config-if)#network-access max-mac-count 5
Console(config-if)#