Installation manual

4-118
SIGNAMAX LLC • www.signamax.eu
Example
accounting exec
This command applies an accounting method to local console or Telnet connections. Use
the no form to disable accounting on the line.
Syntax
accounting exec {default | list-name}
no accounting exec
• default - Specifies the default method list created with the aaa accounting exec
command (page 4-115).
• list-name - Specifies a method list created with the aaa accounting exec
command.
Default Setting
None
Command Mode
Line Configuration
Example
accounting commands
This command applies an accounting method to entered CLI commands. Use the no form
to disable accounting for entered commands.
Syntax
accounting commands level {default | list-name}
no accounting commands level
• level - The privilege level for executing commands. (Range: 0-15)
• default - Specifies the default method list created with the aaa accounting
commands command (page 4-116).
• list-name - Specifies a method list created with the aaa accounting commands
command.
Default Setting
None
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#
Console(config)#line console
Console(config-line)#accounting exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#accounting exec default
Console(config-line)#