Installation manual

4-117
SIGNAMAX LLC • www.signamax.eu
aaa accounting update
This command enables the sending of periodic updates to the accounting server. Use the
no form to disable accounting updates.
Syntax
aaa accounting update [periodic interval]
no aaa accounting update
interval - Sends an interim accounting record to the server at this interval.
(Range: 1-2147483647 minutes)
Default Setting
1 minute
Command Mode
Global Configuration
Command Usage
• When accounting updates are enabled, the switch issues periodic interim
accounting records for all users on the system.
• Using the command without specifying an interim interval enables updates, but
does not change the current interval setting.
Example
accounting dot1x
This command applies an accounting method for 802.1X service requests on an
interface. Use the no form to disable accounting on the interface.
Syntax
accounting dot1x {default | list-name}
no accounting dot1x
• default - Specifies the default method list created with the aaa accounting
dot1x command (page 4-114).
• list-name - Specifies a method list created with the aaa accounting dot1x
command.
Default Setting
None
Command Mode
Interface Configuration
Console(config)#aaa accounting update periodic 30
Console(config)#