Installation manual

4-113
SIGNAMAX LLC • www.signamax.eu
Example
server
This command adds a security server to an AAA server group. Use the no form to remove
the associated server from the group.
Syntax
[no] server {index | ip-address}
• index - Specifies a server index and the sequence to use for the group. (Range:
RADIUS 1-5, TACACS+ 1)
• ip-address - Specifies the host IP address of a server.
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
• When specifying the index for a RADIUS server, that server index must already be
defined by the radius-server host command (see page 4-103).
• When specifying the index for a TACACS+ server, that server index must already
be defined by the tacacs-server host command (see page 4-108).
Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#