Installation manual

4-80
SIGNAMAX LLC • www.signamax.eu
show cluster members
This command shows the current switch cluster members.
Command Mode
Privileged Exec
Example
show cluster candidates
This command shows the discovered Candidate switches in the network.
Command Mode
Privileged Exec
Example
UPnP Commands
Universal Plug and Play (UPnP) is a set of protocols that allows devices to connect
seamlessly and simplifies the deployment of home and office networks. UPnP achieves
this by issuing UPnP device control protocols designed upon open, Internet-based
communication standards.
The commands described in this section allow the switch to advertise itself as a UPnP
compliant device. When discovered by a host device, basic information about this switch
can be displayed, and the web management interface accessed.
Note:
UPnP is currently only supported by this switch for Windows Vista, but will supported for
Windows XP in future releases.
Console#show cluster members
Cluster Members:
ID: 1
Role: Active member
IP Address: 10.254.254.2
MAC Address: 00-12-cf-23-49-c0
Description: 24 port 10/100 Managed Layer 2 Switch wit
Console#
Console#show cluster candidates
Cluster Candidates:
Role Mac Description
--------------- ----------------- -----------------------------------------
ACTIVE MEMBER 00-12-cf-23-49-c0 24 port 10/100 Managed Layer 2 Switch wit
CANDIDATE 00-12-cf-0b-47-a0 24 port 10/100 Managed Layer 2 Switch wit
Console#