Installation manual

4-74

SIGNAMAX LLC • www.signamax.eu

• b-month - The month when summer-time will begin. (Options: january | february

december)

• b-hour - The hour when summer-time will begin. (Range: 0-23 hours)

• b-minute - The minute when summer-time will begin. (Range: 0-59 minutes)

• e-week - The week of the month when summer-time will end. (Range: 1-5)

• e-day - The day of the week summer-time will end. (Options: sunday | monday

• e-month - The month when summer-time will end. (Options: january | february

december)

• e-hour - The hour when summer-time will end. (Range: 0-23 hours)

• e-minute - The minute when summer-time will end. (Range: 0-59 minutes)

• offset - Summer-time offset from the regular time zone, in minutes. (Range: 0-99

minutes)

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

• In some countries or regions, clocks are adjusted through the summer months so

that afternoons have more daylight and mornings have less. This is known as

Summer Time, or Daylight Savings Time (DST). Typically, clocks are adjusted

forward one hour at the start of spring and then adjusted backward in autumn.

• This command sets the summer-time time zone relative to the currently configured

time zone. To specify a time corresponding to your local time when summer-time is

in effect, you must indicate the number of minutes your summer-time time zone

deviates from your regular time zone.

Example

Related Commands

show sntp (4-65)

Console(config)#clock summer-time MESZ recurring 1 friday june 23 59 3

saturday september 2 55 60

Console(config)#