Installation manual

4-72
SIGNAMAX LLC • www.signamax.eu
•e-year- The year summer-time will end.
• e-hour - The hour summer-time will end. (Range: 0-23 hours)
• e-minute - The minute summer-time will end. (Range: 0-59 minutes)
• offset - Summer-time offset from the regular time zone, in minutes.
(Range: 0-99 minutes)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• In some countries or regions, clocks are adjusted through the summer months so
that afternoons have more daylight and mornings have less. This is known as
Summer Time, or Daylight Savings Time (DST). Typically, clocks are adjusted
forward one hour at the start of spring and then adjusted backward in autumn.
• This command sets the summer-time time zone relative to the currently configured
time zone. To specify a time corresponding to your local time when summer-time is
in effect, you must indicate the number of minutes your summer-time time zone
deviates from your regular time zone.
Example
Related Commands
show sntp (4-65)
clock summer-time (predefined)
This command configures the summer time (daylight savings time) status and settings for
the switch using predefined configurations for several major regions of the world. Use the
no form to disable summer time.
Syntax
clock summer-time name predefined [australia | europe | new-zealand | usa]
no clock summer-time
name - Name of the timezone while summer time is in effect, usually an
acronym. (Range: 1-30 characters)
Default Setting
Disabled
Console(config)#clock summer-time DEST date april 1 2007 23 23 april 23
2007 23 23 60
Console(config)#