Installation manual

4-67
SIGNAMAX LLC • www.signamax.eu
Example
Related Commands
ntp client (4-65)
ntp poll (4-67)
show ntp (4-69)
ntp poll
This command sets the interval between sending time requests when the switch is set to
NTP client mode. Use the no form to restore to the default.
Syntax
ntp poll seconds
no ntp poll
seconds - Interval between time requests. (Range: 16-16384 seconds)
Default Setting
16 seconds
Command Mode
Global Configuration
Example
Related Commands
ntp client (4-65)
ntp authenticate
This command enables authentication for NTP client-server communications. Use the no
form to disable authentication.
Syntax
[no] ntp authenticate
Default Setting
Disabled
Console(config)#ntp server 192.168.3.20
Console(config)#ntp server 192.168.3.21
Console(config)#ntp server 192.168.4.22 version 2
Console(config)#ntp server 192.168.5.23 version 3 key 19
Console(config)#
Console(config)#ntp poll 60
Console(config)#