Installation manual

4-64
SIGNAMAX LLC • www.signamax.eu
Command Mode
Global Configuration
Command Usage
This command specifies time servers from which the switch will poll for time
updates when set to SNTP client mode. The client will poll the time servers in the
order specified until a response is received. It issues time synchronization requests
based on the interval set via the sntp poll command.
Example
Related Commands
sntp client (4-62)
sntp poll (4-64)
show sntp (4-65)
sntp poll
This command sets the interval between sending time requests when the switch is set to
SNTP client mode. Use the no form to restore to the default.
Syntax
sntp poll seconds
no sntp poll
seconds - Interval between time requests. (Range: 16-16384 seconds)
Default Setting
16 seconds
Command Mode
Global Configuration
Example
Related Commands
sntp client (4-62)
Console(config)#sntp server 10.1.0.19
Console(config)#
Console(config)#sntp poll 60
Console(config)#