Installation manual

4-60
SIGNAMAX LLC • www.signamax.eu
Command Usage
The specified level indicates an event threshold. All events at this level or higher
will be sent to the configured email recipients. (For example, using Level 7 will
report all events from level 7 to level 0.)
Example
This example will send email alerts for system errors from level 4 through 0.
logging sendmail source-email
This command sets the email address used for the “From” field in alert messages. Use
the no form to delete the source email address.
Syntax
[no] logging sendmail source-email email-address
email-address - The source email address used in alert messages.
(Range: 0-41 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
You may use an symbolic email address that identifies the switch, or the address of
an administrator responsible for the switch.
Example
This example will set the source email [e-mail].
logging sendmail destination-email
This command specifies the email recipients of alert messages. Use the no form to
remove a recipient.
Syntax
[no] logging sendmail destination-email email-address
email-address - The source email address used in alert messages.
(Range: 1-41 characters)
Default Setting
None
Console(config)#logging sendmail level 4
Console(config)#
Console(config)#logging sendmail source-email [e-mail]
Console(config)#