Installation manual

4-55
SIGNAMAX LLC • www.signamax.eu
Default Setting
• Enabled
• Level 7 - 0
Command Mode
Global Configuration
Command Usage
• Using this command with a specified level enables remote logging and sets the
minimum severity level to be saved.
• Using this command without a specified level also enables remote logging, but
restores the minimum severity level to the default.
Example
clear log
This command clears messages from the log buffer.
Syntax
clear log [flash | ram]
• flash - Event history stored in flash memory (i.e., permanent memory).
• ram - Event history stored in temporary RAM (i.e., memory flushed on power
reset).
Default Setting
Flash and RAM
Command Mode
Privileged Exec
Example
Related Commands
show logging (4-56)
Console(config)#logging trap 4
Console(config)#
Console#clear log
Console#