Installation manual

4-51
SIGNAMAX LLC • www.signamax.eu
Command Mode
Normal Exec, Privileged Exec
Example
To show all lines, enter this command:
Event Logging Commands
This section describes commands used to configure event logging on the switch.
Console#show line
Console configuration:
Password threshold: 3 times
Interactive timeout: Disabled
Login timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
VTY configuration:
Password threshold: 3 times
Interactive timeout: 600 sec
Login timeout: 300 sec
console#
Table 4-14 Event Logging Commands
Command Function Mode Page
logging on Controls logging of error messages GC 4-52
logging history Limits syslog messages saved to switch memory based on
severity
GC 4-52
logging host Adds a syslog server host IP address that will receive logging
messages
GC 4-53
logging facility Sets the facility type for remote logging of syslog messages GC 4-54
logging trap Limits syslog messages saved to a remote server based on
severity
GC 4-54
clear log Clears messages from the logging buffer PE 4-55
show logging Displays the state of logging PE 4-56
show log Displays log messages PE 4-57