Installation manual

4-40
SIGNAMAX LLC • www.signamax.eu
dir
This command displays a list of files in flash memory.
Syntax
dir {{boot-rom: | config: | opcode:} [:filename]}
The type of file or image to display includes:
• boot-rom
- Boot ROM (or diagnostic) image file.
• config - Switch configuration file.
• opcode - Run-time operation code image file.
• filename - Name of the configuration file or code image.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the system displays all files.
• File information is shown below:
Example
The following example shows how to display all file information:
Table 4-12 File Directory Information
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.
Console#dir
File name File type Startup Size (byte)
------------------------------------- -------------- ------- -----------
Unit1:
065-7729_diag_V1.0.0.8.bix Boot-Rom Image Y 1383604
065-7729_runtime_V1.1.3.4.bix Operation Code Y 3843400
Factory_Default_Config.cfg Config File N 455
startup1.cfg Config File Y 4721
---------------------------------------------------------------------------
Total free space: 9961472
Console#