Installation manual

4-39
SIGNAMAX LLC • www.signamax.eu
This example shows how to copy a public-key used by SSH from a TFTP server. Note
that public key authentication via SSH is only supported for users configured locally on
the switch:
delete
This command deletes a file or image.
Syntax
delete filename
filename - Name of the configuration file or image name.
Command Mode
Privileged Exec
Command Usage
• If the file type is used for system startup, then this file cannot be deleted.
• “Factory_Default_Config.cfg” cannot be deleted.
Example
This example shows how to delete the test2.cfg configuration file from flash memory.
Related Commands
dir (4-40)
delete public-key (4-130)
Console#copy tftp public-key
TFTP server IP address: 192.168.1.19
Choose public key type:
1. RSA: 2. DSA: <1-2>: 1
Source file name: steve.pub
Username: steve
TFTP Download
Success.
Write to FLASH Programming.
Success.
Console#
Console#delete test2.cfg
Console#