Installation manual

1-6
SIGNAMAX LLC • www.signamax.eu
Advertised information is represented in Type Length Value (TLV) format according to the
IEEE 802.1ab standard, and can include details such as device identification, capabilities
and configuration settings. Media Endpoint Discovery (LLDP-MED) is an extension of
LLDP intended for managing endpoint devices such as Voice over IP phones and network
switches. The LLDP-MED TLVs advertise information such as network policy, power,
inventory, and device location details. The LLDP and LLDP-MED information can be used
by SNMP applications to simplify troubleshooting, enhance network management, and
maintain an accurate network topology.
System Defaults
The system defaults for this switch are provided in the configuration file
“Factory_Default_Config.cfg.” To reset the switch defaults, this file should be set as the
startup configuration file (page 3-22).
The following table lists some of the basic system defaults.
Table 1-2 System Defaults
Function Parameter Default
Console Port
Connection
Baud Rate 9600
Data bits 8
Stop bits 1
Parity none
Local Console Timeout 0 (disabled)