Installation manual

4-23
SIGNAMAX LLC • www.signamax.eu
banner configure equipment-info
This command is used to configure the equipment information displayed in the banner.
Use the no form to restore the default setting.
Syntax
banner configure equipment-info manufacturer-id mfr-id floor floor-id
row row-id rack rack-id shelf-rack sr-id manufacturer mfr-name
no banner configure equipment-info [floor | manufacturer | manufacturer-id |
rack | row | shelf-rack]
• mfr-id - The name of the device model number.
• floor-id - The floor number.
• row-id - The row number.
• rack-id - The rack number.
• sr-id - The shelf number in the rack.
• mfr-name - The name of the device manufacturer.
Maximum length of each parameter: 32 characters
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure equipment-info
command interprets spaces as data input boundaries. The use of underscores ( _ )
or other unobtrusive non-letter characters is suggested for situations where white
space is necessary for clarity.
Example
banner configure equipment-location
This command is used to configure the equipment location information displayed in the
banner. Use the no form to restore the default setting.
Syntax
banner configure equipment-location location
no banner configure equipment-location
location - The address location of the device.
(Maximum length: 32 characters)
Console(config)#banner configure equipment-info manufacturer-id
2852SIGNAMAX-PoE floor 3 row 10 rack 15 shelf-rack 12 manufacturer
SIGNAMAX_Corporation
Console(config)#