Installation manual

4-20
SIGNAMAX LLC • www.signamax.eu
Command Usage
The administrator can batch-input all details for the switch with one command.
When the administrator finishes typing the company name and presses the enter
key, the script prompts for the next piece of information, and so on, until all
information has been entered. Pressing enter without inputting information at any
prompt during the script’s operation will leave the field empty. Spaces can be used
during script mode because pressing the enter key signifies the end of data input.
The delete and left-arrow keys terminate the script. Use of the backspace key
during script mode is not supported. If, for example, a mistake is made in the
company name, it can be corrected with the banner configure company
command.
Example
Console(config)#banner configure
Company: SIGNAMAX Corporation
Responsible department: R&D Dept
Name and telephone to Contact the management people
Manager1 name: Sr. Network Admin
phone number: 123-555-1212
Manager2 name: Wile E. Coyote
phone number: 123-555-1213
Manager3 name: Night-shift Net Admin / Janitor
phone number: 123-555-1214
The physical location of the equipment.
City and street address: 12 Straight St. Motown, Zimbabwe
Information about this equipment:
Manufacturer: SIGNAMAX Networks
ID: 123_unique_id_number
Floor: 2
Row: 7
Rack: 29
Shelf in this rack: 8
Information about DC power supply.
Floor: 2
Row: 7
Rack: 25
Electrical circuit: : ec-177743209-xb
Number of LP:12
Position of the equipment in the MUX:1/23
IP LAN:192.168.1.1
Note: This is a random note about this managed switch and can contain
miscellaneous information.
Console(config)#