Installation manual

4-13
SIGNAMAX LLC • www.signamax.eu
Command Usage
The “>” character is appended to the end of the prompt to indicate that the system
is in normal access mode.
Example
Related Commands
enable (4-12)
configure
This command activates Global Configuration mode. You must enter this mode to modify
any settings on the switch. You must also enter Global Configuration mode prior to
enabling some of the other configuration modes, including Interface Configuration, Line
Configuration, VLAN Database Configuration, and Multiple Spanning Tree Configuration.
See “Understanding Command Modes” on page 4-6.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
end (4-16)
show history
This command shows the contents of the command history buffer.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The history buffer size is fixed at 10 Execution commands and 10 Configuration
commands.
Console#disable
Console>
Console#configure
Console(config)#