Installation manual

4-12
SIGNAMAX LLC • www.signamax.eu
enable
This command activates Privileged Exec mode. In privileged mode, additional commands
are available, and certain commands display additional information. See “Understanding
Command Modes” on page 4-6.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
• “super” is the default password required to change the command mode from
Normal Exec to Privileged Exec. (To set this password, see the enable password
command on page 4-100.)
• The “#” character is appended to the end of the prompt to indicate that the system
is in privileged access mode.
Example
Related Commands
disable (4-12)
enable password (4-100)
disable
This command returns to Normal Exec mode from privileged mode. In normal access
mode, you can only display basic information on the switch's configuration or Ethernet
statistics. To gain access to all commands, you must use the privileged mode. See
“Understanding Command Modes” on page 4-6.
Default Setting
None
Command Mode
Privileged Exec
Console>enable
Password: [privileged level password]
Console#