Installation manual

4-8
SIGNAMAX LLC • www.signamax.eu
To enter the other modes, at the configuration prompt type one of the following
commands. Use the exit or end command to return to the Privileged Exec mode.
For example, you can use the following commands to enter interface configuration mode,
and then return to Privileged Exec mode
Table 4-2 Configuration Modes
Mode Command Prompt Page
Line line {console | vty} Console(config-line)# 4-42
Access
Control List
access-list ip standard
access-list ip extended
access-list mac
Console(config-std-acl)
Console(config-ext-acl)
Console(config-mac-acl)
4-174
4-177
4-182
Class Map class-map Console(config-cmap) 4-304
Interface interface {ethernet port | port-channel id| vlan id} Console(config-if)# 4-186
MSTP spanning-tree mst-configuration Console(config-mstp)# 4-223
Policy Map policy-map Console(config-pmap) 4-307
Server Group aaa group server {radius | tacacs+} Console(config-sg-radius)#
Console(config-sg-tacacs+)#
4-112
VLAN vlan database Console(config-vlan) 4-241
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#