Installation manual

3-270
SIGNAMAX LLC • www.signamax.eu
Configuring Cluster Members
Use the Member Configuration page to add Candidate switches to the cluster as
Members.
Command Attributes
• Member ID – Specify a Member ID number for the selected Candidate switch.
(Range: 1-36)
• MAC Address – Select a discovered switch MAC address from the Candidate Table, or
enter a specific MAC address of a known switch.
Web – Click Cluster, Member Configuration.
Figure 3-155 Cluster Member Configuration
CLI – This example creates a new cluster Member by specifying the Candidate switch
MAC address and setting a Member ID.
Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5 4-78
Console(config)#end
Console#show cluster candidates 4-80
Cluster Candidates:
Role Mac Description
--------------- ----------------- ----------------------------------------
CANDIDATE 00-12-34-56-78-9a
Console#