Installation manual

3-266
SIGNAMAX LLC • www.signamax.eu
Displaying MVR Receiver Groups
Interfaces assigned to the MVR receiver groups can be displayed using the Receiver
Group IP Information page.
Field Attributes
• Group IP Address – Multicast groups assigned to the MVR Receiver VLAN.
• Group Port List – Interfaces with subscribers for multicast services provided through
the MVR Receiver VLAN.
Web – Click MVR, Receiver Group IP Information. Select a receiver group multicast
address from the “Group IP Address” field to show the interfaces which have joined the
selected group.
Figure 3-151 MVR Receiver Group Address Table
CLI – This example shows the interfaces which have joined MVR receiver groups, and
the status of MVR traffic for each group.
Console#show mvr receiver-group members 4-335
MVR Group IP Status Members
---------------- -------- -------
224.0.1.1 ACTIVE eth1/5
224.0.2.2 INACTIVE None
Console#