Installation manual

3-264
SIGNAMAX LLC • www.signamax.eu
Command Attributes
• Interface – Indicates a port or trunk.
• Member – Shows the IP addresses for MVR multicast groups which have been statically
assigned to the selected interface.
• Non-Member – Shows the IP addresses for all MVR multicast groups which have not
been statically assigned to the selected interface.
Web – Click MVR, Group Member Configuration. Select a port or trunk from the
“Interface” field, and click Query to display the assigned multicast groups. Select a
multicast address from the displayed lists, and click the Add or Remove button to modify
the Member list.
Figure 3-149 MVR Group Member Configuration
CLI – This example statically assigns a multicast group to a receiver port.
Console(config)#interface ethernet 1/2
Console(config-if)#mvr group 228.1.23.1 4-333
Console(config-if)#