Installation manual

3-253
SIGNAMAX LLC • www.signamax.eu
Web – Click IGMP Snooping, IGMP Filter Configuration. Create a profile group by
entering a number in the text box and clicking Add. Enable the IGMP filter status, then
click Apply.
Figure 3-142 Enabling IGMP Filtering and Throttling
CLI – This example enables IGMP filtering and creates a profile number. It then displays
the current status and the existing profile numbers.
Configuring IGMP Filter Profiles
When you have created an IGMP profile number, you can then configure the multicast
groups to filter and set the access mode.
Command Usage
• Each profile has only one access mode; either permit or deny.
• When the access mode is set to permit, IGMP join reports are processed when a
multicast group falls within the controlled range. When the access mode is set to deny,
IGMP join reports are only processed when the multicast group is not in the controlled
range.
Command Attributes
• Profile ID – Selects an existing profile number to configure. After selecting an ID
number, click the Query button to display the current configuration.
Console(config)#ip igmp filter 4-324
Console(config)#ip igmp profile 19 4-324
Console(config)#end
Console#show ip igmp profile 4-329
IGMP Profile 19
IGMP Profile 25
Console#