Installation manual

3-232
SIGNAMAX LLC • www.signamax.eu
Add Class – Opens the “Class Configuration” page. Enter a class name and description
on this page, and click Add to open the “Match Class Settings” page. Enter the criteria
used to classify ingress traffic on this page.
Remove Class – Removes the selected class.
Class Configuration
Class Name – Name of the class map. (Range: 1-16 characters)
Type Only one match command is permitted per class map, so the match-any field
refers to the criteria specified by the lone match command.
Description – A brief description of a class map. (Range: 1-64 characters)
Add Adds the specified class.
Back – Returns to previous page with making any changes.
Match Class Settings
Class Name – List of class maps.
ACL List – Name of an access control list. Any type of ACL can be specified, including
standard or extended IP ACLs and MAC ACLs. (Range: 1-16 characters)
IP DSCP – A DSCP value. (Range: 0-63)
IP Precedence – An IP Precedence value. (Range: 0-7)
VLAN – A VLAN. (Range:1-4094)
Add Adds specified criteria to the class. Up to 16 items are permitted per class.
Remove – Deletes the selected criteria from the class.