Installation manual

3-217
SIGNAMAX LLC • www.signamax.eu
• Port Description – A string that indicates the port’s description. If RFC 2863 is
implemented, the ifDescr object should be used for this field.
• Port ID – A string that contains the specific identifier for the port from which this LLDPDU
was transmitted.
• System Name – An string that indicates the system’s configures assigned name.
• System Description – A textual description of the network entity.
• System Capabilities Supported – The capabilities that define the primary function(s)
of the system. (See Table 3-16, “System Capabilities,” on page 213.)
• System Capabilities Enabled – The primary function(s) of the system which are
currently enabled. Refer to the preceding table. (See Table 3-16, “System Capabilities,”
on page 213.)
• Management Address – The IPv4 address of the remote device. If no management
address is available, the address should be the MAC address for the CPU or for the port
sending this advertisement.
Web – Click LLDP, Remote Information Details. Select an interface from the drop down
lists, and click Query.
Figure 3-121 LLDP Remote Information Details
Interface name ifName (IETF RFC 2863)
Agent circuit ID agent circuit ID (IETF RFC 3046)
Locally assigned locally assigned
Table 3-17 Port ID Subtype (Continued)
ID Basis Reference