Installation manual

3-216
SIGNAMAX LLC • www.signamax.eu
Web – Click LLDP, Remote Port/Trunk Information.
Figure 3-120 LLDP Remote Port Information
CLI – This example displays LLDP information for remote devices attached to this switch
which are advertising information through LLDP.
Displaying LLDP Remote Information Details
Use the LLDP Remote Information Details screen to display detailed information about an
LLDP-enabled device connected to a specific port on the local switch.
Field Attributes
• Local Port – The local port to which a remote LLDP-capable device is attached.
• Chassis Type – Identifies the chassis containing the IEEE 802 LAN entity associated
with the transmitting LLDP agent. There are several ways in which a chassis may be
identified and a chassis ID subtype is used to indicate the type of component being
referenced by the chassis ID field. (See Table 3-15, “Chassis ID Subtype,” on
page 213.)
• Chassis ID – An octet string indicating the specific identifier for the particular chassis in
this system.
• Port Type – Indicates the basis for the identifier that is listed in the Port ID field.
Console#show lldp info remote-device 4-294
LLDP Remote Devices Information
Interface | ChassisId PortId SysName
--------- + ----------------- ----------------- ---------------------
Eth 1/1 | 00-01-02-03-04-05 00-01-02-03-04-06
Console#
Table 3-17 Port ID Subtype
ID Basis Reference
Interface alias IfAlias (IETF RFC 2863)
Chassis component EntPhysicalAlias when entPhysClass has a value of ‘chassis(3)’ (IETF RFC 2737)
Port component EntPhysicalAlias when entPhysicalClass has a value ‘port(10)’ or ‘backplane(4)’
(IETF RFC 2737)
MAC address MAC address (IEEE Std 802-2001)
Network address networkAddress