Installation manual

3-215
SIGNAMAX LLC • www.signamax.eu
CLI – This example displays LLDP information for the local switch.
This example displays detailed information for a specific port on the local switch.
Displaying LLDP Remote Port Information
Use the LLDP Remote Port/Trunk Information screen to display information about devices
connected directly to the switch’s ports which are advertising information through LLDP.
Field Attributes
• Local Port – The local port to which a remote LLDP-capable device is attached.
• Chassis ID – An octet string indicating the specific identifier for the particular chassis in
this system.
• Port ID – A string that contains the specific identifier for the port from which this LLDPDU
was transmitted.
• Port Name – A string that indicates the port’s description. If RFC 2863 is implemented,
the ifDescr object should be used for this field.
• System Name – An string that indicates the system’s administratively assigned name.
Console#show lldp info local-device 4-293
LLDP Local System Information
Chassis Type : MAC Address
Chassis ID : 00-01-02-03-04-05
System Name :
System Description : 24 port 10/100 Managed Layer 2 Switch with 4 x Gigabit
Combo ports
System Capabilities Support : Bridge
System Capabilities Enable : Bridge
Management Address : 192.168.0.101 (IPv4)
LLDP Port Information
Interface |PortID Type PortID PortDesc
--------- + ---------------- ----------------- ---------------------------
Eth 1/1 |MAC Address 00-01-02-03-04-06 Ethernet Port on unit 1, port 1
Eth 1/2 |MAC Address 00-01-02-03-04-07 Ethernet Port on unit 1, port 2
Eth 1/3 |MAC Address 00-01-02-03-04-08 Ethernet Port on unit 1, port 3
Eth 1/4 |MAC Address 00-01-02-03-04-09 Ethernet Port on unit 1, port 4
Eth 1/5 |MAC Address 00-01-02-03-04-0A Ethernet Port on unit 1, port 5
.
.
.
Console#show lldp info local-device ethernet 1/1 4-293
LLDP Port Information Detail
Port : Eth 1/1
Port Type : MAC Address
Port ID : 00-01-02-03-04-06
Port Desc : Ethernet Port on unit 1, port 1
Console#