Installation manual

3-214
SIGNAMAX LLC • www.signamax.eu
• System Capabilities Enabled – The primary function(s) of the system which are
currently enabled. Refer to the preceding table.
• Management Address – The management address protocol packet includes the IPv4
address of the switch. If no management address is available, the address should be
the MAC address for the CPU or for the port sending this advertisement.
Interface Settings
The attributes listed below apply to both port and trunk interface types. When a trunk is
listed, the descriptions apply to the first port of the trunk.
• Port Description – A string that indicates the port’s description. If RFC 2863 is
implemented, the ifDescr object should be used for this field.
• Port ID – A string that contains the specific identifier for the port from which this LLDPDU
was transmitted.
Web – Click LLDP, Local Information.
Figure 3-119 LLDP Local Device Information