Installation manual

3-213
SIGNAMAX LLC • www.signamax.eu
Displaying LLDP Local Device Information
Use the LLDP Local Device Information screen to display information about the switch,
such as its MAC address, chassis ID, management IP address, and port information.
Field Attributes
Global Settings
• Chassis Type – Identifies the chassis containing the IEEE 802 LAN entity associated
with the transmitting LLDP agent. There are several ways in which a chassis may be
identified and a chassis ID subtype is used to indicate the type of component being
referenced by the chassis ID field.
• Chassis ID – An octet string indicating the specific identifier for the particular chassis in
this system.
• System Name – An string that indicates the system’s administratively assigned name
(see “Displaying System Information” on page 3-12).
• System Description – A textual description of the network entity. This field is also
displayed by the show system command.
• System Capabilities Supported – The capabilities that define the primary function(s)
of the system.
Table 3-15 Chassis ID Subtype
ID Basis Reference
Chassis component EntPhysicalAlias when entPhysClass has a value of ‘chassis(3)’ (IETF RFC 2737)
Interface alias IfAlias (IETF RFC 2863)
Port component EntPhysicalAlias when entPhysicalClass has a value ‘port(10)’ or ‘backplane(4)’
(IETF RFC 2737)
MAC address MAC address (IEEE Std 802-2001)
Network address networkAddress
Interface name ifName (IETF RFC 2863)
Locally assigned locally assigned
Table 3-16 System Capabilities
ID Basis Reference
Other —
Repeater IETF RFC 2108
Bridge IETF RFC 2674
WLAN Access Point IEEE 802.11 MIB
Router IETF RFC 1812
Telephone IETF RFC 2011
DOCSIS cable device IETF RFC 2669 and IETF RFC 2670
End Station Only IETF RFC 2011