Installation manual

3-209
SIGNAMAX LLC • www.signamax.eu
• MED Fast Start Count – Configures the amount of LLDP MED Fast Start LLDPDUs to
transmit during the activation process of the LLDP-MED Fast Start mechanism.
(Range: 1-10 packets; Default: 4 packets)
The MED Fast Start Count parameter is part of the timer which ensures that the
LLDP-MED Fast Start mechanism is active for the port. LLDP-MED Fast Start is critical
to the timely startup of LLDP, and therefore integral to the rapid availability of
Emergency Call Service.
Web – Click LLDP, Configuration. Enable LLDP, modify any of the timing parameters as
required, and click Apply.
Figure 3-117 LLDP Configuration
CLI – This example sets several attributes which control basic LLDP message timing.
Console(config)#lldp 4-275
Console(config)#lldp refresh-interval 60 4-278
Console(config)#lldp holdtime-multiplier 10 4-276
Console(config)#lldp tx-delay 10 4-279
Console(config)#lldp reinit-delay 10 4-278
Console(config)#lldp notification-interval 30 4-277
Console(config)#lldp medFastStartCount 6 4-276
Console(config)#exit
Console#show lldp config 4-291
LLDP Global Configuation
LLDP Enable : Yes
LLDP Transmit interval : 60
LLDP Hold Time Multiplier : 10
LLDP Delay Interval : 10
LLDP Reinit Delay : 10
LLDP Notification Interval : 30
.
.
.