Installation manual

3-206
SIGNAMAX LLC • www.signamax.eu
Web – Click VLAN, Protocol VLAN, Configuration.
Figure 3-115 Protocol VLAN Configuration
CLI – This example shows the switch configured with Protocol Group 2 which matches
RFC 1042 IP traffic.
Configuring the Protocol VLAN System
Use the Protocol VLAN System Configuration menu to map a Protocol VLAN Group to a
VLAN.
Command Usage
When a frame enters a port that has been assigned to a protocol VLAN, it is processed in
the following manner:
• If the frame is tagged, it will be processed according to the standard rules applied to
tagged frames.
• If the frame is untagged and the protocol type matches, the frame is forwarded to the
appropriate VLAN.
• If the frame is untagged but the protocol type does not match, the frame is forwarded to
the default VLAN for this interface.
Command Attributes
• Protocol Group ID – Protocol Group ID assigned to the Protocol VLAN Group. (Range:
1-2147483647)
• VLAN ID – VLAN to which matching protocol traffic is forwarded. (Range: 1-4094)
Console(config)#protocol-vlan protocol group 2 add frame-type
rfc-1042 protocol-type ip 4-264
Console(config)#