Installation manual

3-201
SIGNAMAX LLC • www.signamax.eu
Web – Click VLAN, Private VLAN, Configuration. Enter the VLAN ID number, select
Primary or Community type, then click Add. To remove a private VLAN from the switch,
highlight an entry in the Current list box and then click Remove. Note that all member
ports must be removed from the VLAN before it can be deleted.
Figure 3-111 Private VLAN Configuration
CLI – This example configures VLAN 5 as a primary VLAN, and VLAN 6 as a community
VLAN.
Associating VLANs
Each community VLAN must be associated with a primary VLAN.
Command Attributes
• Primary VLAN ID – ID of primary VLAN (2-4094).
• Association – Community VLANs associated with the selected primary VLAN.
• Non-Association – Community VLANs not associated with the selected VLAN.
Web – Click VLAN, Private VLAN, Association. Select the required primary VLAN from
the scroll-down box, highlight one or more community VLANs in the Non-Association list
box, and click Add to associate these entries with the selected primary VLAN. (A
community VLAN can only be associated with one primary VLAN.)
Figure 3-112 Private VLAN Association
Console(config)#vlan database 4-241
Console(config-vlan)#private-vlan 5 primary 4-259
Console(config-vlan)#private-vlan 6 community