Installation manual

3-187
SIGNAMAX LLC • www.signamax.eu
Web – Click VLAN, 802.1Q VLAN, Static Table. Select a VLAN ID from the scroll-down
list. Modify the VLAN name and status if required. Select the membership type by
marking the appropriate radio button in the list of ports or trunks. Click Apply.
Figure 3-103 Configuring a VLAN Static Table
CLI – The following example adds tagged and untagged ports to VLAN 2.
Console(config)#interface ethernet 1/1 4-186
Console(config-if)#switchport allowed vlan add 2 tagged 4-247
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#switchport allowed vlan add 2 untagged
Console(config-if)#exit
Console(config)#interface ethernet 1/13
Console(config-if)#switchport allowed vlan add 2 tagged
Console(config-if)#