Installation manual

3-181
SIGNAMAX LLC • www.signamax.eu
Enabling or Disabling GVRP (Global Setting)
GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange VLAN
information in order to register VLAN members on ports across the network. VLANs are
dynamically configured based on join messages issued by host devices and propagated
throughout the network. GVRP must be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch. (Default: Disabled)
Web – Click VLAN, 802.1Q VLAN, GVRP Status. Enable or disable GVRP, click Apply
Figure 3-99 Globally Enabling GVRP
CLI – This example enables GVRP for the switch.
Displaying Basic VLAN Information
The VLAN Basic Information page displays basic information on the VLAN type supported
by the switch.
Field Attributes
• VLAN Version Number
15
– The VLAN version used by this switch as specified in the
IEEE 802.1Q standard.
• Maximum VLAN ID – Maximum VLAN ID recognized by this switch.
• Maximum Number of Supported VLANs – Maximum number of VLANs that can be
configured on this switch.
Web – Click VLAN, 802.1Q VLAN, Basic Information.
Figure 3-100 Displaying Basic VLAN Information
Console(config)#bridge-ext gvrp 4-238
Console(config)#
15. Web Only.