Installation manual

3-155
SIGNAMAX LLC • www.signamax.eu
Web – Click Address Table, Dynamic Addresses. Specify the search type (i.e., mark the
Interface, MAC Address, or VLAN checkbox), select the method of sorting the displayed
addresses, and then click Query.
Figure 3-90 Configuring a Dynamic Address Table
CLI – This example also displays the address table entries for port 1.
Console#show mac-address-table interface ethernet 1/1 4-214
Interface Mac Address Vlan Type
--------- ----------------- ---- -----------------
Eth 1/ 1 00-12-CF-48-82-93 1 Delete-on-reset
Eth 1/ 1 00-12-CF-94-34-DE 2 Learned
Console#