Installation manual

3-102
SIGNAMAX LLC • www.signamax.eu
Displaying Web Authentication Port Information
This switch can display web authentication information for all ports and connected hosts.
Command Attributes
• Interface – Indicates the ethernet port to query.
• IP Address – Indicates the IP address of each connected host.
•Status – Indicates the authorization status of each connected host.
• Remaining Session Time (seconds) – Indicates the remaining time until the current
authorization session for the host expires.
Web – Click Security, Web Authentication, Port Information.
Figure 3-59 Web Authentication Port Information
CLI – This example displays web authentication parameters for port 1/5.
Re-authenticating Web Authenticated Ports
The switch allows an administrator to manually force re-authentication of any
web-authenticated host connected to any port.
Command Attributes
• Interface – Indicates the port to query.
• Host IP – Indicates the IP address of the host selected for re-authentication.
• Re-authenticate – Ends all web authentication sessions connected to the port and
forces the users to re-authenticate.
Console#show web-auth interface ethernet 1/5 4-161
Web Auth Status : Enabled
Host Summary
IP address Web-Auth-State Remaining-Session-Time
--------------- -------------- ----------------------
1.1.1.1 Authenticated 295
1.1.1.2 Authenticated 111
Console#