Installation manual

3-95
SIGNAMAX LLC • www.signamax.eu
Web – Select Security, 802.1X, Statistics. Select the required port and then click Query.
Click Refresh to update the statistics.
Figure 3-54 Displaying 802.1X Port Statistics
CLI – This example displays the 802.1X statistics for port 4.
Filtering IP Addresses for Management Access
You can create a list of up to 16 IP addresses or IP address groups that are allowed
management access to the switch through the web interface, SNMP, or Telnet.
Command Usage
• The management interfaces are open to all IP addresses by default. Once you add an
entry to a filter list, access to that interface is restricted to the specified addresses.
• If anyone tries to access a management interface on the switch from an invalid address,
the switch will reject the connection, enter an event message in the system log, and
send a trap message to the trap manager.
Console#show dot1x statistics interface ethernet 1/4 4-141
Eth 1/4
Rx: EAPOL EAPOL EAPOL EAPOL EAP EAP EAP
Start Logoff Invalid Total Resp/Id Resp/Oth LenError
2 0 0 1007 672 0 0
Last Last
EAPOLVer EAPOLSrc
1 00-12-CF-94-34-DE
Tx: EAPOL EAP EAP
Total Req/Id Req/Oth
2017 1005 0
Console#