Installation manual

3-66
SIGNAMAX LLC • www.signamax.eu
Web – Click Security, AAA, Radius Group Settings. Enter the RADIUS group name,
followed by the number of the server, then click Add.
Figure 3-35 AAA Radius Group Settings
CLI – Specify the group name for a list of RADIUS servers, and then specify the index
number of a RADIUS server to add it to the group.
Configuring AAA TACACS+ Group Settings
The AAA TACACS+ Group Settings screen defines the configured TACACS+ servers to
use for accounting and authorization.
Command Attributes
• Group Name - Defines a name for the TACACS+ server group. (1-255 characters)
• Server - Specifies the TACACS+ server to use for the group. (Range: 1)
When specifying the index for a TACACS+ server, the server index must already be
defined (see “Configuring Local/Remote Logon Authentication” on page 3-58).
Web – Click Security, AAA, TACACS+ Group Settings. Enter the TACACS+ group name,
followed by the number of the server, then click Add.
Figure 3-36 AAA TACACS+ Group Settings
Console(config)#aaa group server radius tps-radius 4-112
Console(config-sg-radius)#server 1 4-113
Console(config-sg-radius)#server 2 4-113
Console(config-sg-radius)#