Installation manual

3-60

SIGNAMAX LLC • www.signamax.eu

• TACACS Settings

- Global – Provides globally applicable TACACS+ settings.

- Server Index – Specifies the index number of the server to be configured. The switch

currently supports only one TACACS+ server.

- Server IP Address

– Address of the TACACS+ server.

- Server Port Number – Network (TCP) port of TACACS+ server used for

authentication messages. (Range: 1-65535; Default: 49)

- Number of Server Transmits – Number of times the switch tries to authenticate

logon access via the authentication server. (Range: 1-30; Default: 2)

- Timeout for a Reply – The number of seconds the switch waits for a reply from the

RADIUS server before it resends the request. (Range: 1-540; Default: 5)

Note:

The local switch user database has to be set up by manually entering user names and

passwords using the Web or CLI. (See “Configuring User Accounts” on page 3-56 or

“username” on page 4-99)