System information

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
80
Power Down: Enable or disable the Managed Switch to send a trap notice while the
Managed Switch is power down.
4.3 Switch Management
Click Switch Management folder from the Main menu and then the following sub-items
appear.
1. Switch Configuration: Set up the maximum frame size.
2. Port Configuration: Enable or disable port speed, flow control, etc.
3. Port Mirroring: Set up target port and source port to enable traffic monitoring.
4. DSCP Remark: Set up queues and DSCP mappings.
5. Static Multicast Configuration: To create, edit or delete Static Multicast table.
6. Rapid Spanning Tree: Set up RSTP switch settings, aggregated port settings, physical
port settings, etc.
7. 802.1X Configuration: Set up the 802.1X system, port Admin state, port reauthenticate.
8. MAC Address Management: Set up static MAC address table.
9. VLAN Configuration: Set up VLAN mode and VLAN configuration.
10. QoS Configuration: Set up the priority queuing, rate limit and storm control.
11. IGMP Snooping: Enable or disable IGMP and set up IGMP VLAN ID configuration.
12. MVR Configuration: Set up Multicast VLAN Registration configurations.
13. Security Configuration: Set up DHCP option 82 agent relay, port setting, filtering and
static IP table configuration.
14. Access Control List Management: Set up access control entries and lists.