System information

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
79
4.2.5 Trap Destination
Click the option Trap Destination from the Network Management menu and then the
following screen page appears.
Only 10 trap destination accounts can be used. For each account, click the “Edit” button to
change its state and modify its destination IP address and community description.
State: Enable or disable the function of sending trap to the specified destination.
Destination: Enter the specific IP address of the network management system that will
receive the trap.
Community: Enter the community name of the network management system.
Click the “Change” button to modify each trap destination’s settings and the new settings
will appear in the SNMP Trap Destination table below.
Click the “Delete” button to clear each trap destination’s settings.
4.2.6 Trap Configuration
Click the option Trap Configuration from the Network Management menu and then the
following screen page appears.
Port Link: Enable or disable the Managed Switch to send port link up or link down trap.