System information

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
63
port numbers with the format 5, 7, 8, 9, 12 or
5, 7-9, 12
<enable | disable>: Enable or disable port
state.
For example:
SWH(config-security-anti-bcast)# state 1-4,
10-15, 18, 19 enable
exit
Quit the current mode and return to
Configuration mode.
show
Show or verify currently-configured settings.
2.6.14 Switch command mode
Enter the switch command in Config mode. Then, the switch mode shows as follows:
SWH(config)# switch
SWH(config-switch)#
Command Purpose & Description Usage
=================== =========================== =============================
max-frame Set Max Frame Size max-frame <num>
exit Exit from current mode exit
show Show Switch Settings show
SWH(config-switch)#
Prompt Command &Parameter Description
SWH(config-
switch)#
max-frame <num>
Specify the maximum frame size.
<num>: Specify “0” to denote 1522 bytes. “1”
to denote 1536 bytes. “2” to denote 1522
bytes. “3” to denote 9216 bytes.
For example:
SWH(config-switch)# max-frame 3
exit
Quit the current mode and return to the
Configuration mode.
show
Show current Switch settings.