System information

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
50
address.
For example:
SWH(config-mvr)# add 4094 1-4,10-15,18,19
5-9,16,17 xxx.xxx.xxx.xxx
delete <vlan_id>
To delete a registered MVR VLAN ID.
<vlan_id>: 1~4094
For example:
SWH(config-mvr)# delete 4094
exit
Quit the current mode and return to
Configuration mode.
show
Show current MVR VLAN information.
Edit details of an existing MVR entry.
If you would like to modify an existing MVR entry, you can enter mvr vlan_id after
SWH(config)#. For example, enter SWH(config)# mvr 4094 to modify the details of the
MVR VLAN 102.
receiveport <rec_port_list> <rec_port_list>: Switch ports that receive
multicast data are specified as receiver ports.
Specify a port number or a range of port
numbers (1~26 or 1~28).
sourceport <sor_port_list> <sor_port_list>: Uplink ports resided in
multicast VLAN and send and reecive
multicast data are selected as source ports
(1~26 or 1~28). Please note that the source
ports specified here should be router ports as
well. Refer to IGMP command mode section
for detailed explanations on setting up router
ports.
serverip <ip> <ip>: Specify the media server IP address.
exit
Quit the current mode and return to
Configuration mode.
SWH(config-
mvr_vlan_id)#
show
Show currently-configured MVR setting.
add <vlan_id> <ip> <ip>
To add a new MVR group and specify the
multicasting channel that would belong to
MVR VLAN.
<vlan_id>: 1~4094
<ip><ip>: Specify the group range
224.0.1.0~238.255.255.255
For example:
SWH(config-mvr-group)# add 4094 224.0.1.0
238.255.255.255
delete <vlan_id> <ip> <ip>
To delete a registered MVR group.
<vlan_id>: 1~4094
<ip><ip>: Specify the group range
224.0.1.0~238.255.255.255
For example:
SWH(config-mvr-group)# delete 4094
224.0.1.0 238.255.255.255
exit
Quit the current mode and return to MVR
configuration mode.
SWH(config-mvr-
group)#
show
Show MRV group configurations.