System information

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
20
Type in the sub-command after “show dot1x” to view its current configurations. For
example, if you issue “show dot1x sys” command, the following screen page appears.
Show Currently-Configured Settings
When you type a specific command in Enable or Config mode to configure or edit the setting
of a certain function, you can type “show” to view the setting you have just configured or
edited. For example, when you are in SWH(console)# and have changed the setting of
time-out function, you can type “show” after “SWH(console)#” then you can view the
currently-configured setting of time-out function.