System information

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
16
security
When in Config
mode, enter the
security
command.
SWH(config-
security)#
Configure Option82,
Storm Control and
Anti-broadcasting
settings.
switch
When in Config
mode, enter the
switch command.
SWH(config-
switch)#
Set up the max-frame.
vlan
When in Config
mode, enter the
vlan command.
SWH(config-
vlan)#
Set up VLAN mode
and VLAN
configuration.
show
When in Config
mode, enter the
show command or
enter the show
command and
followed by the
command you
would like to view
its current
setting.
SWH(config)# Show a list of
commands or show
the current setting of
each listed command.
2.3.2 Quick keys
Using the key… To do this…
Enter the “?” commands Obtain a list of available commands in the current
mode.
Enter incomplete characters then
enter the question mark (?)
List all commands similar to incomplete characters.
Press the direction  or  key Scroll through the command history.
Enter unique part of a command and
press TAB key
The switch will automatically display the full
command.
Ctrl + A Move to the start of line.
Ctrl + B Move the cursor to the space on the left.
Ctrl + D Logout.
Ctrl + E Move to the end of line.
Ctrl + H Clear the preceding character.
Ctrl + I The same function as the TAB key.
Ctrl + K Clear all characters starting from the cursor.
Ctrl + L Re-enter the same command line.
Ctrl + M Enter
Ctrl + N Display history commands.
Ctrl + P Display history commands.
Ctrl + U Clear all characters.
Ctrl + W Clear characters before the cursor.