System information

SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:[phone] l F:[phone] l www.signamax.eu
103
 Enable MVR global setting.
 Create MVR VLAN and indicate the Source port and Receive port.
 Create MVR Groups whose multicasting channels would belong to MVR VLAN.
 Enable VLAN Aware in MVR Source Port. In a normal condition, Tag
multicasting stream injects to Source port. (Optional)
 Setting VLAN Port Egress mode in MVR Receiver port. In a normal condition,
Un-tag multicasting stream forward to receive port. (Optional)
Limitation:
 Receiver ports on a switch can be in different VLANs, but they should not belong
to the multicast VLAN.
 Do not configure MVR on private VLAN ports.
 MVR can coexist with IGMP snooping on a switch.
 MVR data received on an MVR receiver port is not forwarded to MVR source
ports.
 MVR does not support IGMPv3 messages.
 MVR on IPv6 multicast groups is not supported.
Click the folder MVR Configuration from the Switch Management menu and then the
following screen page appears.
1. MVR Settings: To enable or disable MRV global settings and create MVR VLAN to
indicate the Source and Receive port.
2. MVR Group: Create MVR Groups whose multicasting stream would belong to MVR
VLAN.