User`s guide

Signamax ™ 10/100TX to 100FX Media Converter
User’s Manual 5
Product Features
 One-channel media conversion between 10/100BaseTX and 100BaseFX
 Fiber media allow
s:
 Multi-mode fiber using SC, ST, VF-45, MT-RJ or LC connector
 Single-mode fiber us
ing SC connector
 WDM single-fibe
r (bi-direction) transceiver: Single-mode WDM fiber uses
SC connector
 A t
ype: WDM single-fiber (bi-direction) transceiver transmits with 1310nm
wavelength and receives with 1550nm wavelength
 B t
ype: WDM single-fiber (bi-direction) transceiver transmits with 1550nm
wavelength and receives with 13100nm wavelength
 Auto negotiation of speed and duplex mode on TX port
 Auto MDIX on TX port
 One DIP
switch for configuring link-fault-pass-through, fixed speed, and
half/full duplex
 Store-and-forw
ard mechanism
 Non-blocking full w
ire-speed forwarding rate
 Support broadcast storm filtering
 Back-pressure & IEEE802.3x compliant flow
control
 Front panel status LEDs
 USB bus pow
er and/or external AC to DC power adapter
 External AC to DC pow
er adapter
 Used as a stand-alone device or w
ith a chassis
 Hot-sw
appable when used with a chassis
Packing List
When you unpack this product package, you will find the items listed below. Please
inspect the contents, and report any apparent damage or missing items immediately
to our authorized reseller.
 The Media Converter
 User’s Manual
 AC to DC Pow
er Adaptor