User`s guide

Signamax 10/100TX to 100FX Industrial PoE Media Converter
User’s Manual 11
Power Input Assignment (30W High Power PoE model)
Power 1
＋
48~52VDC for 15.4W
52~57VDC for 30W
Terminal Block
－
Power Ground
Earth Ground
Power 2
48~52VDC for 15.4W
52~57VDC for 30W
DC Jack
DIP Switch
There are four pins on the DIP switch for port settings. Refer
to the table below for more details.
DIP
Switch
On Off
1
Enable forced mode for
10/100BaseT/TX port
Enable auto negotiation for
10/100BaseT/TX
2 10/100BaseT/TX port forced to
10Mbps
10/100BaseT/TX port forced to
100Mbps
3 10/100BaseT/TX port forced to half
duplex mode
10/100BaseT/TX port forced to full
duplex mode
4
Enable Link Fault Signaling
Disable Link Fault Signaling